Clean your tiles and get rid of dirt with this tile cleaner.
Ingredients
- 1/4 cup distilled white vinegar
- 1/4 cup baking soda
- 1 teaspoon liquid dish soap
- 2 gallons of very hot water
Instructions
- 1/4 cup distilled white vinegar, 1/4 cup baking soda, 1 teaspoon liquid dish soap.
- Mix the vinegar, soda, and dish soap in the bottom of the bucket.
- 2 gallons of very hot water
- Add very hot water and mix well.
- Mop the floor with the solution. There shouldn’t be a need to rinse it afterwards, but if you do notice any soapy residue, wipe it off with a damp towel. Air dry.
How do you clean a bathroom floor with vinegar and dish soap?
Vinegar is a fantastic all-purpose cleaner. It cleans soap scum off shower curtains and, even on its own, it’s a great way to scrub your tile floor. Combine vinegar and dish soap for the best floor cleaner for the home.
Ingredients
- 1 gallon of hot water
- ¼ cup white vinegar
- 1 tablespoon dish soap
- 1 pair of rubber gloves
- A mop, a handful of rags, or a microfiber cloth
Fill a bucket or bathroom sink with hot water and mix vinegar and dish soap for the perfect cleaner for tiles in the bathroom, kitchen, or anywhere else in the house. Use a tile mop or damp cloth and apply the cleaner to the bathroom floor, from the back of the room to the door.
Rinse the cloth or mop as soon as it is dirty, re-damp it in the cleaning product and continue. Once you’ve mopped the ceramic tile and scrubbed the floors to remove any stains, rinse the mop or cloth with clean water.
Go over the entire surface again, making sure to wipe away any soap or excess water to prevent water spots. Rinse the mop or rag often.
Learn how to clean bathroom tiles with baking soda.
You are lucky if you do not need to clean the tile joints daily. However, if you need to clean stains or deposits, baking soda is the best tile grout cleaner of all commercial cleaning products.
Ingredients
- White vinegar
- spray bottle
- 1 cup bicarbonate of soda
- 1 cup of hot water
- 1 pair of rubber gloves
- 1 soft bristle brush
- paper towels or microfiber cloth
Fill the spray bottle with vinegar. Pour the baking soda into a bowl and add the water in drops until a thick paste forms. Apply the paste to the tile joints, brush the area lightly, and spray the stain with vinegar.
Wait a few minutes and rub again. Wipe clean area. Vinegar can damage marble and other stone floors. So check before using this homemade cleaner to clean marble or other more delicate types of floors.
Test the method on an inconspicuous area first to determine if it is safe for your bathroom floor before mopping the entire floor. Vinegar and baking soda aren’t just for bathroom floors.
Homemade multi-purpose floor cleaner
Ingredients
- 2 cups of hot water
- ½ cup white vinegar
- ¼ cup isopropyl alcohol
- 3 drops of liquid dish soap (make sure it does not contain antibacterial, moisturizing or oxygen bleaching ingredients).
- 5-10 drops of essential oil (such as peppermint oil) of your choice.
Mix the ingredients in a large bowl. To learn how to clean vinyl or other types of flooring, add the ingredients to a plastic or glass spray bottle and shake well. Liberally spray cleaner on floor and mop clean.
You can also combine the ingredients in a bucket, but you’ll need to throw out the leftovers after you’ve finished cleaning the floor. This recipe is excellent for removing many types of stains and will leave your floor smelling and looking like new. Add this recipe and regular floor cleaning to your weekly or monthly house cleaning checklist.
Note: Do not substitute liquid dish soap for Castile soap, as it is an oil-based soap. If you use castile soap, your floor will be covered in spots and streaks that you will need to clean again.
Household cleaner for wooden floors
With our homemade hardwood floor cleaner, you can use hot water and a mop to clean your floors every day. If your floor is dirty, you can use this recipe to clean it. This formula has a double effect: it polishes your floor and gives it a beautiful natural shine.
Ingredients
- 1 gallon of hot water
- ¾ cup olive oil
- ½ cup lemon juice
Mix the ingredients in a bucket. Using a well-wrung mop, apply the solution to your floors. Let air dry.
The best disinfectant floor cleaner
For your floors that need regular deep cleaning and sanitizing, like bathroom and shower tiles, here is a great household cleaner that does a fantastic job of sanitizing.
Ingredients
- 1 gallon of hot water
- ¼ cup borax
In a mop bucket, combine the water and borax and stir well. Dip a mop into the bucket and mop your floors.
Borax is excellent for cleaning the coarsest soils on a variety of surfaces. Add it to your cleaning repertoire for your granite floors or as a cleaner for marble tile floors. Your tiles will shine again.
homemade cleaner for laminate floors
If you use the wrong type of cleaning product, you risk damaging your floor’s finish and ending up with even more serious problems. This homemade laminate floor cleaner will clean your laminate floors without damaging them.
Ingredients
- 2 cups of hot water
- 2 cups of vinegar
- 5 to 10 drops of essential oil of your choice
Mix ingredients in a mop bucket or spray bottle. Using a clean mop, dip it into the solution and mop the laminate floors. It is not necessary to rinse the mixture. Let dry. This recipe can also be used to clean bamboo floors.
You can also clean your floors by spraying them with a spray bottle filled with the cleaner and then scrubbing with a mop. You’ll have to rinse the mop in the sink a few times when it gets dirty, but this way you won’t have to throw away any unused solution.
Vinegar Floor Cleaner
The white vinegar you have at home is extremely versatile. It can be used to make spicy pickles, to dress a salad, or to brighten bathroom mirrors. It is also ideal for cleaning different types of floors.
Ingredients
- ½ cup of hot water
- ½ cup liquid dish soap
- 1 2/3 cup baking soda
- 2 tablespoons distilled white vinegar
Take care of how to clean tile floors the easy way with this recipe. Add the ingredients together, stirring until all the clumps dissolve. Pour the mixture into a spray bottle. Working in small sections, spray the solution on the floor and mop the floor. Be sure to rinse the floor well with clean water to avoid leaving streaks.
Vinegar mixed with baking soda, water, and dish soap not only cleans your floors and makes them shine, but this mixture can be used for many other purposes as well.
Clean countertops, toilets, bathtubs, showers, painted walls, and even stains on your carpet or mattress! You can’t go wrong with this combination for cleaning and disinfecting all kinds of places in your home or office.
Homemade Natural Tile Cleaner
If you have tile floors in your home, you can use common household ingredients to remove layers of dirt, grime, and dust. The cleaner will help loosen dirt while gently cleaning the tiles. Best of all, they won’t leave soap residue behind. You can eliminate the need for stronger commercial cleaners by using this cleaner weekly.
Ingredients
- 1 gallon of hot water
- ¾ cup white vinegar
- 1 cup bicarbonate of soda
- 1 cup ammonia
Fill a bucket with the ingredients, stirring well to dissolve the baking soda. Pour the mixture into a spray bottle. Spray the cleaner directly onto your tiles, working section by section. Mop the floor using a bucket containing one cup of vinegar and ten cups of hot water. Let dry.
Cleaning your floors with a natural homemade cleaner is a great way to go green at home. Using natural ingredients in your pantry and essential oils keeps your entire home smelling clean and fresh while removing dirt, bacteria, and germs.
Homemade spray recipe to clean floors
Excellent for vinyl and laminate surfaces.
Ingredients
- 16 drops of orange essential oil
- 4 ounces of rubbing alcohol
- 250 ml of vinegar
- 6 drops of regular dishwashing liquid without additives
- 32 ounces of water
- 64 ounce glass spray bottle
- Scrub
Instructions
- Mix the ingredients well in the spray bottle.
- Generously spray one area of the floor at a time.
- Clean with a damp mop.
- Let air dry or use a dry mop.
